[AX90046] Axial SCX10 II™ 2000 Jeep® Cherokee 1/10th Scale Electric 4WD – Pro Kit
Description:
The Axial SCX10 II retains the spirit of the SCX10 with its all-metal twin c-channel frame rails.
But the frame rails are only 2% of this completely fresh design. Scale AR44 high pinion axles,
a chassis mounted servo (CMS), re-designed transmission with transfer case, front mounted battery tray,
aluminum suspension links that use M4 hardware, and a suspension design that creates nearly zero bump steer.
These are just a few of the features built into the SCX10 II.
Feature:
AR44 HI-PINION AXLES
High pinion gears for added ground clearance & better driveshaft angles
The high pinion design allows increased gear surface contact for increased durability
Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain
Single piece axle housing for added strength
Small pumpkin for increased clearance and a more realistic, scale look
Front and rear 1-piece lockers
Bolt on link mounts
Knuckle carriers and straight axle adapters have a better mounting system with 10-degree increment adjustments
Optimized gear ratio – 3.75 compared the previous at 2.92 – this reduces torque twist at the axle which is typically seen with other small pumpkin axle designs
KINGPIN ANGLE:
8 degree kingpin angle
Improved scrub radius over the AX10 axle
AR44 UNIVERSAL AXLE SET
Up to 45 degrees of steering
Smooth action for an efficient drivetrain
Compact yet durable design
Hardened steel construction
SCX10™ II TRANSMISSION
Transfer case design helps keep the driveshaft’s centered and as low as possible in the chassis
Final drive ratio range 33.69 – 54.15 with available spur - pinion gear combinations
Comes with 56T spur gear and 15T pinion / 32-pitch for durability
All metal internal gears for strength and durability
Final drive ratio (FDR) 40.44 with a range from 33.69 - 54.15 - Original SCX10 was 33.06
Scale looks mimics a full size transmission and transfer case
CHASSIS MOUNTED SERVO (CMS)
Scale looks with proper suspension geometry
Anodized aluminum links included w/ M4 rod ends
Adjustable servo mounting system allows for a wide range of servos to be used
Properly designed suspension for nearly zero bump steer
ALL ALUMINUM SUSPENSION LINKS
All links are metal including the steering
Custom tapered center - flared ends design
Large M4 rod ends
Grey anodized aluminum
ADJUSTABLE WHEELBASE
Wheelbase adjustment is easily done in the rear end without affecting the steering geometry and maintaining zero bump steer.
Adjustable wheelbase (11.4”/ 12.0” / 12.3”) with optional links sold separately
4 link rear
12.3” wheelbase
STEEL C-CHANNEL FRAME RAIL CHASSIS
The realistic high strength c-channel chassis frame is made of durable steel with cross bracing for reinforcement and is held together with all hex hardware.
Main shock body is threaded for quick ride height adjustments and pre-load tuning ability.
Completely rebuildable, tunable and offer consistent handling.
61-90mm Aluminum Shock Set with 7mm piston.
WATERPROOF RECEIVER BOX / ESC TRAY
Three different silicone seals are included, one for the antenna, one for the servo wires (includes three slots for three channels), and one that acts as a gasket for the receiver box cover. No more stress when running in mud, water, or snow!
Waterproof receiver box located on the side plates allows easy access and low center of gravity.
Clean mounting surface for your ESC is large enough to accommodate up to 50x40mm footprint.
WIRE ROUTING
Wire routing has been thoroughly thought through to help keep your chassis layout looking clean.
In addition to including wire clips/guides, there has been a channel created that runs the length of the chassis so you can run additional wires hidden inside the c-channel frame.
Optional mounting points and wire routing for a chassis mounted servo winch and 2 speed shift servo.
WB8 HD WILDBOAR™ DRIVESHAFTS
WB8 HD Wildboar™ front and rear driveshafts feature an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength.
A center splined slider floats between each end and features added material which reduces flex and fatigue.
3-piece driveshaft with strengthened slider-floater tube.
Increased surface at the connection between the ball joints and output shaft tubes.
2x11mm cross pin adds 25% more surface area providing more strength for the ball joint.
Captured cross pin design eliminates older set screw design for more durability/easy maintenance.
Adjustable length driveline parts included in box.
2000 JEEP® CHEROKEE BODY
Comes with molded scale detail parts (Grill with clear lenses, mirrors, door handles and liftgate trim panel).
Clear Body with detailed decal sheet and window masks
*Photos for reference only.
Vehicle Specification:
Length: 22.1” (562mm)
Width: 8.9” (226mm)
Height: 10.5” (268mm)
Wheelbase: 12.3” (313mm)
Ground Clearance: 3.0” (77mm)
Include:
Axial SCX10 II 2000 Jeep Cherokee 1/10 4WD Rock Crawler Kit (1 Set)
We accept the following forms of payment: - Credit Card - Visa - MasterCard - American Express - Discover - PayPal
배송정보
배송 방법 : Parcel Service
배송 지역 : A Region.
배송 비용 : International Shipping Fee
배송 기간 : 7 - 14 days
배송 안내 : Please take into consideration that some products may take additional time for delivery and processing. Important: Your order is shipped once your payment has been cleared. Please contact our customer service center if you would like to request an exchange or return on your order.
- Customs and Duties
The recipient will be held responsible for international shipments which may be subject to import duties and taxes. Please be advised that these charges are levied by the destination country and we do not have control over them. In the case that the recipient refuses to receive the parcel, the order will be returned to Korea and will not be re-shipped. Relevant expenses (round-trip shipping, customs, etc.) will be deducted from the refund.
교환 및 반품정보
1. Address for returns and exchanges: - [14491] 3rd floor Rccapro, 25, Sudo-ro 105beon-gil, Bucheon-si, Gyeonggi-do, Republic of Korea
2. Requirements:
Please take into consideration that we only accept qualifying returns but not exchanges. Refunds are issued once the returned products clear our inspection.
1) An item is eligible for cancellation if: -you posted a Return request within 24 hours of payment and your order is still under “Pending” status (if your order is under “Preparing Shipment” status, please contact our customer service center) or -the order is delayed for more than 10 days since payment and you have not received any notification regarding the delay; or -the ordered item is out of stock.
2) We accept return(s) if:
-you receive a product different from your order; or
-you receive a defective product.
**Return Instructions
(1) Post a return request on our Return forum within three days of receipt. You are required to attach the photos of the received product(s) and include the item code, the order number, and the reason for the return.
(2) A customer service representative will be in contact to assist you by email or phone.
(3) Items returned must be in their original condition, which includes tags and any packaging. Also, you need to include a note of your order number, name, and user ID.
*Please be advised that returns are accepted ONLY IF you followed the instructions above and your return request has been approved by our staff. Returns that are shipped to us without any prior consent are not accepted.
*Please note that EVEN the defective/incorrect item(s) must be returned with all of the tags and labels intact. The item(s) must be sent in their original packaging and unworn.
*Please include all contents of the original package and free gifts (if applicable) in your return packaging.
* Shipping fee for any return caused by our fault will be paid by the company. However, if EMS’ cash on delivery is not possible then you can scan the return receipt and either mail it with the item to return or post an image of it on the forum. The shipping fee will be refunded once the returned item has arrived.
3) We do not accept return(s) if:
-you are returning the items just because you changed your mind (on size, color, etc.) -you are returning shoes, bags, or any other accessories -the products are damaged due to your mishandling -your return request is not approved by our staff
The following items are not considered defective:
* Items that are originally manufactured without tags or labels * Items with creases that may have been made while shipping * Items with unsatisfactory/incomplete finish due to mass production
4) If there is a missing item from your order:
*Contact our customer service center by phone or by forum (if you cannot reach us by phone) within 1 day of delivery. *Please keep all contents of the original package including packaging material (boxes, plastic bags etc.) with you until you are instructed otherwise.
Please note that we may not be able to process the refund for your missing item if you lose or damage any packaging material.
서비스문의
1800-4785 궁금하신사항은 전화주시면 친절하게 상담하여 드리겟습니다. 언제나 즐거운 인생 되시길 진심으로 꼭 바랍니다. 감사합니다..